Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discrete, doesn't employ LED indications or key fobs and is hidden within the vehicle's wiring.
It also allows the user to turn off the system temporarily through Transport Mode to use it when they are renting their vehicle. This guide will take you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your car and protected by a PIN code you set. It's undetectable to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by cutting circuits.
The system is easy to use, but it's essential to use a an expert installation to ensure a clean and secure connection with your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. Once this is done the installer is now able to begin work. Hand tools are the most basic to be used for precise connections. A multimeter is useful to check electrical values. Insulation tape and cable tie are vital to secure connections and ensure that wiring is neat. Lastly, the user manual provides specific guidance specific to your Ghost Immobiliser model.
It is essential to choose an area for grounding that is free of dirt or paint during installation. The installer should also make sure the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be plugged into or soldered, depending on the model. To ensure a stable and durable connection it is recommended you choose a top-quality plug.
Once the installation is complete Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The user must press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent option for anyone who regularly rents their vehicle on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it reduces the likelihood of theft.
Getting Started
If ghost 11 immobiliser looking for a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device stops your car from starting even when someone copies or steals your key. This is due to its high-tech technology that is designed to prevent the car's engine from starting unless the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN and allows direct communication with the ECU. It uses existing buttons on the dashboard and the steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your car. This is the ultimate security system that will safeguard your pride and joy and preserve its value when you want to sell it in the future.
Installing Ghost's immobiliser is straightforward, but you must follow the steps to avoid electrical problems and malfunctions of the system. First, you must locate a power supply of 12V and a good grounding on the chassis of your car. Then, you can start connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a strong connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits of electricity.
Once the wires have been connected, you are able to connect the battery and start the engine to determine whether the immobiliser works. If everything is functioning properly you can place it in a safe location under the dash or somewhere else in the vehicle. Be sure to conceal it securely so that thieves can't tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it meets the highest standards of security and is a great deterrent to car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use and can be set into an option for a service valet so that your vehicle won't be activated if you bring it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with the factory settings of your car, unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data for communication with your ECU. It doesn't even require any modifications to your current key fobs.
Enter the sequence to disarm (either two or one button) and then turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash two times to verify that you have entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to give your car over for service or valet park.
You'll require a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by thieves. Make sure you check the exact locations of these points to avoid mistakes, and mark them with the help of tape or a label. Verify all connections for signs that they are wearing out. Make sure that all connections are in place, and properly sealed. Finally, don't forget to test the Ghost Immobiliser after the installation is complete. This will ensure that the unit functions properly and that all connections are secure and insulated. If you encounter any issues, you must be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that integrates seamlessly into your car's ECU to block the engine from starting without authorization. Its innovative technology safeguards your vehicle against key cloning and hacking along with other methods commonly employed by thieves to steal vehicles. The Ghost also works in tandem with existing alarm and tracking systems to give the best protection for your vehicle. The Ghost's unparalleled features and subtle design make it a preferred choice for car enthusiasts and security-conscious drivers alike.
It is important to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. The best place to start is to look over the vehicle's wiring diagram that serves as a guideline for locating and connecting the necessary wires. After that, you'll need determine the power source and grounding points. Once you've located them, you will need to mark the points to make them easy to locate when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can assist in making connections that are precise while a multimeter can check electrical values and ensure security. Insulation tape and cable ties can help keep connections tidy and neat. A Ghost-specific user's guide is also available.
Before beginning the installation, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser works as intended and prevent unauthorised vehicle starts. It is recommended that you perform this procedure regularly as part of your regular vehicle inspections to ensure that the system is operating correctly.
After the installation is completed, you can drive your car with confidence. The Ghost will safeguard your car from potential car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with most major brands. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are done safely and properly.