Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that blocks your car from starting without a unique pin code sequence, inputted via existing buttons (such as those on the dashboard or on the steering wheel). The device is inaccessible to thieves and is quiet to operate.
It also helps in preventing newer methods, such as hotwiring and theft of relays. It can also lower the cost of insurance.
No Radio Frequencies
A car ghost immobiliser works differently than a traditional immobiliser in that there is no radio frequency that is transmitted which prevents it from being bypassed by thieves using a low-cost and easily available device for cloning. This means that a ghost immobiliser will stop your car from being started even if a thief has successfully cloned your key or taken it.
Ghost immobilisers are also effective against relay attacks. The signal from your key fob is amplified in order to fool the system to allow your car to start. The Ghost will recognize this and refuse to start the vehicle until you enter the PIN code. This is an excellent way to combat tech-savvy thieves who have access to inexpensive and simple equipment to clone or take your car.
The Ghost can be installed in a discreet manner and will not cause damage to your car. It will only work when the correct pin sequence has been entered. This will only be known by the person who set it up, meaning that nobody can use your car unless they know your pin code. Certain systems allow the owner to create a valet or service mode, which allows them to temporarily let others use their vehicle without revealing their pin code. This helps protect them from thefts by opportunistic thieves.
The Ghost is not just simple to use and easy to dearm, it can be connected to a car tracker so that you can locate your vehicle. Certain insurance companies will offer a discount on your car insurance if it's got a Ghost installed which is a great benefit for the security of your car and its contents.
The Ghost immobiliser, although not Thatcham certified, is an aftermarket product that has been independently evaluated and proved to work. Ask the seller of a secondhand vehicle with the Ghost installed if they can transfer it to your car. This will make your new car more secure than it would be in the case that the previous owner hadn't transferred it.
No Circuit Cuts
The absence of circuit cuts means that even in the event that your car is taken away, thieves will not be able to begin it. The thieves must know which buttons are used to unlock the vehicle, and they will not be able to do that without knowing these sequences. This will further deter them and make sure that they don't attempt the theft in the first place since they may not be able to leave with the car.
If you have a GPS tracker on your Ghost could also serve as an anti-theft gadget since it can send an alert to the tracker that will sound a siren to notify the tracker of any attempts to steal. This feature can be turned on at any time via your online dashboard.
When you connect your Ghost to the CAN data network it will identify your vehicle and its owner using the unique pin code you programmed during installation. This enables the device to directly communicate with the ECU of your vehicle and disable its engine. This means that the engine will only be turned on if it is authorized by the vehicle owner or someone who has a valid PIN code.
Because the pin code is created from existing buttons within easy reach of the driver (such as cruise control and stereo mutes) it is mathematically inaccessible to be guessed by potential thieves. Your engineer will also supply you with an emergency Pin Code override card which is similar to scratch-off lottery tickets and only requires scratching off to reveal the code and instructions.
Unlike traditional immobilisers which are usually identified by thieves using diagnostics to read the relay of the immobiliser, your Ghost is indiscernible using these methods since it doesn't utilize circuit cuts or radio frequencies. This means it is not affected by modern techniques employed by organized criminal gangs that specialize in RF scanning and code-grabbing technology. It is also a lifetime product that can easily be removed from your car after you sell it, which means that you won't lose any of the security that you have put into.
No Key Fobs
In the UK, vehicle theft is on the rise. It is imperative to take proactive measures to protect your prized cars from opportunistic criminals. The Autowatch Ghost Immobiliser is a revolutionary device that offers a robust defense against key cloning attacks, hacking and attacks on signals relay. It is a discreet and highly effective car security system that is simple to install in a vast range of automobiles.
In contrast to traditional systems that depend on key fobs, the Ghost immobiliser does not have LED indicators and operates through an electronic signal relay. It is not affected by signal interference and cannot be activated using stolen or compromised remotes. It is also tamper proof and doesn't have any external wiring, which makes it difficult to remove or disable.
It protects you from key-long hacking, key theft and key-long by blocking your engine from running until a unique PIN is entered. This is accomplished by using buttons that are already on the vehicle, for example those on the steering wheel or door panels.
It only works only if you enter the correct pin code. This makes it difficult for thieves to steal your vehicle and is easy to use. If you're concerned about losing your pin code or forgetting your pin code, you can request the installer to provide you with a driver's fob that allows you to drive the car as normal.
The Ghost immobiliser is not detected by diagnostic equipment, such as RF scanners or other tools employed by thieves. This installation that is stealthy improves the effectiveness of the system and allows it to be installed in a place that is difficult for thieves.
Ghost immobilisers can be an affordable, but effective way to deter thefts and increase the value of your car. They are also accepted by a few insurance companies and can lead to reduced rates.
No Damage
You can be confident that your vehicle will be secured from hacking and cloning as well as key fob theft, among other common theft methods, if it is fitted with an immobiliser. This is particularly crucial if you've spent a an enormous amount of time and money in making your vehicle more unique or have a high-value or unique model. autowatch ghost 2 immobiliser work silently and do not require any additional parts or installation.
The system is activated by buttons on your steering wheel, center console, or door panels. It allows you to create an encrypted pin code sequence that must be entered before the engine can start. The sequence can be altered by you at any time, meaning that even if a thief has your pin number, they cannot start your car. The device can also be turned off in the service valet mode, so that you can drive your vehicle away for cleaning or servicing without activating it.
The criminal won't be able to start your car in the event that it is copied and they'll be caught. The system can be alerted to any alteration to your vehicle's wiring for example, signal interference or cutting. This information can be transmitted to your smartphone to ensure that you are aware of the security status of your car.
However, there could be a point at which you're looking to take off or disable the Ghost Immobiliser for maintenance or for resale. In this scenario, you will need to follow a careful process to unplug the device without damaging the wiring system of your vehicle. Wearing safety gloves and using a flashlight is recommended during this procedure. It is also advisable to refer to any installation instructions or user manuals you might have available to determine the exact location of the device.
You can then connect the battery to the car and test it to make sure that the immobiliser is working correctly and all electrical components function in the way you intended. You'll need soldering or electrical tape to shield any wires that have been cut. Ensure that no exposed wires are present, and that any dangling wires are secured using zip ties or other appropriate means. To ensure that your vehicle is not damaged through the removal process, you should schedule a professional vehicle checkup.