Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed in the vehicle's wiring.
It also allows users to temporarily disable the system through Transport Mode in the event of renting out their vehicle. This guide will walk you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to your car's ECU and is secured by a unique PIN code of your choice. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by cutting circuits.
The system is easy to use, however it's important to have professional installation to ensure a clean and secure connection with your vehicle's ECU. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's security package.
First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can be able to work safely. Basic hand tools can be used for precise connections. A multimeter is useful to check electrical values. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is crucial to select the right grounding spot that is free of dirt or paint during installation. The installer must also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be connected or soldered depending on the model. Using a high-quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be turned on by the client after the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the user must hit the button for service on the dashboard 5 times in a matter of 2 seconds. Once this is done, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent out their vehicles frequently through platforms like Turo. Immobilisers can lower insurance rates, as it decreases the likelihood of theft.
Getting Started
If you're looking for a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser . The device stops your car from starting if someone steals or copies your key. It is possible because of its advanced technology, which prevents the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus system CAN which allows direct communication with the ECU. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your vehicle. This is the most secure security system that will safeguard your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing a ghost immobiliser is an easy procedure, but it is important to follow the directions carefully to avoid problems with the electrical system and malfunctions. You'll need to find a 12V power source and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits in electrical power.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. After you've verified that everything is working properly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Be sure to conceal it in a secure manner so that thieves can't alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it meets the highest standards of security and is an excellent protection against car thieves. It is resistant to hacking and key cloning and cannot be disabled without the code. The device is also simple to use and can be set into a service valet mode so that your car is not activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It connects directly to the car's CAN bus network and communicates with the ECU and ECU, making it a virtually undetectable addition to your vehicle. Unlike other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with any of the factory settings for your vehicle.
The system is also inaccessible by thieves using diagnostic scanning tools. This is due to the fact that it doesn't send and receive radio frequency signals and it utilizes the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash two times to confirm that you've entered the correct code. After this, you can start your car and drive away safely.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you ever need to hand over your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and able to be touched. It is also recommended to use cable ties to bundle and secure the wires. This will reduce the risk of theft by thieves. To avoid mistakes, double-check these points and mark them with labels or tape. Verify all connections for signs they're getting worn out. Connectors that are loose could cause system malfunctions, so be sure that they're firmly in place and properly insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will confirm that the unit functions properly and that all connections and insulation are safe. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that seamlessly into your vehicle's ECU to stop unauthorised engine start. The innovative technology protects your vehicle from key cloning and hacking along with other common methods used by thieves to steal cars. The Ghost also works in tandem with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unmatched features, paired with its discreet design, make it a popular choice for car enthusiasts and security conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it's important to follow every step of the installation procedure. The best way to begin is to look over the vehicle's wiring diagram that will serve as a guideline for locating and connecting the wires required. The next step is to determine the power and grounding sources. Once you've identified these, you'll have to mark them in a way that they're easy to identify during the installation process. It's essential to use high-quality materials and tools. Hand tools are essential to aid in making precise connections. A multimeter will check electrical values, and also ensure safety. Cable tie and insulation tape will keep all connections neat. A Ghost-specific user's manual is also available.
Before beginning the installation, it's important to test the system by entering the PIN code and then starting the vehicle. This test will verify that the immobiliser works as intended and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine vehicle inspections in order to ensure the system is always working correctly.
After the installation is completed, you can begin driving your vehicle with confidence. The Ghost will protect your car from would-be car thieves. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This lets you track your car in the event that it's stolen.
The Ghost is compatible with a variety of vehicles, including those from all major manufacturers. If you are interested in protecting your car with this innovative device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines in the installation of our products. This assures insurance companies, customers and law enforcement officials that all installations are completed in a safe and correct manner.