Ghost 2 Immobiliser Problems
The Ghost immobiliser protects your vehicle from key-cloning and hacking. It prevents your car from starting until specific buttons are pressed sequentially.
It can be installed discretely and connects directly to the CAN data network. It is therefore very difficult for thieves and vandals to get around it.
Frequent Code Incorrect Match
The Ghost immobiliser is a security measure to protect against key cloning and hacking. It also helps to prevent key theft. The device works by interfacing with your vehicle's CAN data networks and by using buttons on the dashboard and steering wheel to create an individual code pattern that must be entered before the engine can start. It is therefore very difficult for thieves bypass the system. The system isn't completely perfect and may have issues that can affect its performance.
For example, frequent mismatches can result in the device locking down your vehicle for a short period of time, or over attempts might drain your battery. In these instances you'll need to enter the new PIN number to unlock your vehicle again. Some Ghost installations can also interfere with other systems within the vehicle and trigger unexpected behaviour. In these instances you'll need to speak with your installer for assistance.
Inconsistent Operation
If the device fails to engage or disengage as per expectations It could be an indication of faulty wiring or installation. The issue could be a software issue which can be resolved by contact your installer.
The Ghost user's guide typically includes a section on the emergency code. This code is usually hidden under a scratch-off area on a card that's included in the installation. It's essential to keep this code in a safe location that is separate from the vehicle.
Ghost immobilisers are prone to malfunction if users have trouble performing the disarming sequence correctly. This is likely due to a misunderstanding or forgetting the procedure. This issue can be resolved by reading the manual for the device's user for instructions on how to enter the disarming code.
There are some who have issues with the system's inability to disable the vehicle stop/start feature. This could be caused by an issue with software that isn't related to the Ghost immobiliser or it could be an error with the car's original system. In either case, you'll need to test the car's stop/start functionality before determining if the Ghost is the culprit.
Battery Drain
Ghost immobilisers can give you peace of mind, as they safeguard your vehicle from theft. However, just like other security systems for cars that are made by the aftermarket, it can occasionally experience problems that can hinder the effectiveness of your vehicle's security. Luckily, taking preventative measures can help avoid these issues and enjoy the benefits of your ghost ignition for years to be.
One of the most frequent issues with ghost immobilisers is a rapid battery drain. This is caused by an electrical current that drains the battery in the car. If you don't notice it right away it could cause a sudden loss of power. In some instances this could cause the engine to stall when it attempts to start.
If you choose a reputable ghost immobiliser brand or an expert car customization installer, you can avoid this problem. They will ensure that the system is installed correctly and maintained properly. Also, making sure that the device is running with the latest firmware will aid in avoiding issues such as this.
Ghost immobilisers can also fail to turn off the vehicle's start/stop feature. This could be due to an error in the system's configuration, but it could also be a technical problem with your vehicle. In these situations it is recommended you seek the advice of an expert local to diagnose and fix the problem.
A reputable company should be able to provide assistance in completing the correct sequence for disarming the ghost immobiliser. This can be a bit confusing and is usually specific to your particular vehicle model. Additionally, the manual for your vehicle may also include details on how to go through the disarm sequence. If this doesn't help you, you can consult an expert such as Car Keys Solutions to learn the correct procedure.
Lost or forgotten PIN code
When you install the Ghost Immobiliser into your vehicle, it creates a unique code sequence that is needed to enter before you can start the engine. This is to protect your vehicle from thieves attempting to make use of cloned fobs and other security devices that are sold aftermarket to trick the system into believing they have a valid key, which allows the engine to start.
The Ghost is a next-generation product that connects to the CAN data network of your vehicle. It uses the existing buttons in your vehicle (like the ones on the dashboard or steering wheel) to allow you to create a custom code sequence that you only know, meaning it cannot be used by a thief. It's also hidden within your vehicle, without lights or radio signals to indicate its location.
This makes it difficult for a professional burglar to locate and then tamper with. Additionally, the ghost is undetectable to thieves who try to use diagnostics tools to detect alarm/immobiliser circuits in modern vehicles because it doesn't transmit any radio frequency signals.
There are several ways to enter your emergency code if you have lost or misplaced your black card. You can try calling the installer who installed the device since they may have a copy of it on file or you can call an authorized Ghost dealer. This could involve verification procedures and possibly cost.
Be aware that the emergency code is input using the accelerator pedal. So, if you're having trouble entering the sequence correctly be sure to go through the manual of your manufacturer and know how to input the code. We also suggest keeping the emergency code in a safe place outside your vehicle for quick reference should you ever need to use it again. The best way to prevent these problems is by ensuring your Ghost is installed correctly by an approved fitter, so be sure to contact us at Autowatch or Car Keys Solutions for more details.
Unexpected Behavior
If you recently had a ghost 2 immobiliser fitted to your vehicle, you may be experiencing strange behavior. While this unique system can aid in preventing key cloning and hacking, there are a few issues that could arise.
Unexpected or unusual behavior can be a sign of a problem with your ghost immobiliser. Common issues include faulty wiring, power supply issues, and incompatibility with other systems. There is also the possibility of experiencing a loss of functionality due to firmware updates or programming mistakes.
If you're experiencing one of these issues, it's best to seek out a professional for assistance. They'll be able to identify and fix the issue so that your ghost immobiliser will perform as it should.
I have 2022 Highlander Platinum with the Ghost 2 fitted. I'm experiencing some issues with it, especially when in transport mode (which is why I suspect it's connected). cost of ghost immobiliser jumps from drive to park every when I put the vehicle in reverse. The car won't start unless I enter the disarm sequence.
It's also been difficult to get into the disarm sequence when my engine warning lights are on. I've tried to turn off the lights but that does not seem to work either. I'm not sure if it's a compatibility issue or if there are other solutions.
When your Ghost immobiliser is in transport mode, the device does not communicate with the vehicle's ECU via the CAN data network. This stops thieves from being able to detect the click of an immobiliser relay, and it's impossible to disable this feature. This is why it's so important to use the device on vehicles that are marked as compatible.
Make sure that you ensure that your Ghost immobiliser is installed by a qualified technician to avoid any issues with the device's wiring and compatibility with other systems. Installers who are reputable will be able to install the device without cutting wires. They should also keep track of the installation process to help in resolving future issues.